Dynarack
Push Back Racking
Last In First Out Racking L.I.F.O.
|
Click on image to see its full size
|
Dynarack
Inc.'s
push back racking provides Last In First Out (L.I.F.O) stock rotation
of your product.
Pallets are placed on telescoping storage carts set on inclined
support rails. The lift truck driver will position the first pallet
to be loaded into the push back system on the top storage cart.
The second pallet to be stored will be brought to the push back
lane by the fork truck driver. They will use the second pallet
on the fork truck to push the first pallet already on a push back
cart into the system, then place the second pallet onto the second
storage cart. This will be repeated with subsequent load to a
maximum of six pallets deep per lane.
|
Unloading
of the systems is done in reverse from loading. The fork truck
driver controls the speed at which the pallets cycle forward in
the lane with the rate they back the unload pallet out of the
system.
Dynarack Inc. push back is available
in 2 to 6 pallet deep per lane systems. The height of a system
is only limited by the lift off height of your fork trucks.
A Dynarack Inc. push back racking
systems uses the same fork truck access aisle for loading and
unloading of pallets, thus requiring only one aisle for fork truck
access.
|
Click on image to see its full size
|
Click on image to see its full size |
Each
lane utilizes it own set of telescoping storage carts and support
rails. This increases the selectivity of push back racking over
drive-in or drive-through racking. This increase in selectivity
makes Dynarack Inc. push back racking the proper choice for most
storage application where Last In First Out is an acceptable storage
solution.
Click on image to see its full size
|
Dynarack Inc.
442 Millen Road - Unit #13
Stoney Creek, ON
L8E 6H2
Telephone : 905-664-1998
Fax : 905-664-3911
|
